Image
Product
Price
- Performance Air Intake System
- Includes Air Filter/Tubing/Adaptors/Hardware;Not Legal For Sale Or Use In California
- K/N s 57i induction kits are easy to install; economical; and come with K/N s No-Hassle Lifetime Limited Warranty. They consist of a large washable/reusable K/N air filter with adapters for connection to the engine s throttle body.
- 57i Series Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 8.063 In. (205mm)
- Clamp Style: Regular
- Coupler Color: Black
- WARNING CA Proposition 65: Yes
- California Restricted: Not Legal For Sale Or Use In California
- TUV Approved (Europe): No
- Replacement Filter: Rc-5126
- Item Weight: 3.700 Lbs. (1.7 Kg)
- Product Box Height: 9.000 In. (229mm)
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Product Box Width: 9.000 In. (229mm)
- Air Filter Outlet Length: 4.000 In. (102mm)
- Product Box Length: 9.000 In. (229mm)
- Clamp Quantity: 3
- Intake Pipe Color: Black
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Clamp Material: Steel
- Prop 65 (C, R or CR): Cr
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: High-density Polyethylene And Flex Hose
- Air Filter Outlet Width: 4.000 In. (102mm)
- Air Filter Element Washable: Yes
- Package Material: Paperboard
- Couplers Included: 1
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: No
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Replaces The Entire Factory Air Intake System
- Washable And Reusable Lifetime Air Filter
- Lasts Up To 100 000 Miles Before Service Required
- Easy To Install - Usually in 90 Minutes or Less
- K&N Million Mile Limited Warranty
- K&N 57i Series induction kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. The extra surface area of these open-air air filters provides even more airflow at lower restriction than a K&N O/E replacement filter which is limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adapters are made from high quality materials such as steel, aluminum, silicon or reinforced nylon to ensure long life. 57i Series Intakes are not legal for use in California and other US States adopting California emission standards.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2004 - Mazda 6 | L | 2260 | 4 Cyl 2.3L | i | - |
- Performance Air Intake System
- Includes Red Air Filter/Water Repellent DryCharger Filter Wrap/Silver Tubing; Estimated Horsepower Gain 6.64 HP At 4700 RPM;CARB E.O. D-269-37
- K/N s easy-to-install Typhoon cold air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tubes come in a silver powder coat finish.
- Typhoon Complete Cold Air Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 6.500 In. (165mm)
- Clamp Style: Regular
- Coupler Color: Blue
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 6.64 Hp @ 4700 Rpm
- TUV Approved (Europe): No
- Intake Pipe Inlet Shape: Round
- Replacement Filter: Ru-4870
- Item Weight: 7.000 Lbs. (3.2 Kg)
- RPM: 4700
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Air Filter Outlet Length: 2.750 In. (70mm)
- System Type: Complete Cold Air
- Clamp Quantity: 5
- Air Filter Large End Diameter: 6.000 In. (152mm)
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Silver
- Clamp Color: Natural
- Clamp Material: Stainless Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: Aluminum
- Air Filter Outlet Width: 2.750 In. (70mm)
- Horse Power Increase: 7 Hp
- Intake Pipe Inlet Length: 8.250 In. (210mm)
- Air Filter Element Washable: Yes
- Couplers Included: 3
- Package Material: Paperboard
- Intake Pipe Inlet Width: 2.750 In. (70mm)
- Intake Pipe Outlet Length: 17.750 In. (451mm)
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: Yes
- Intake Pipe Outlet Width: 2.750 In. (70mm)
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Easy To Install Usually In 90 Minutes or Less
- Lasts Up To 100000 Miles Before Service Is Required
- Replaces Entire Factory Air Intake System
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
- The K&N 69-6026TS Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Mazda 6 models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in relatively cooler air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of denser air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-6026TS cold-air intake consists of a black rubber topped K&N high-flow air filter that mounts near the driver side wheel well directing cooler outside air through free-flowing aluminum tubing into a short ram induction tube that delivers high volumes of clean, colder air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a black water-repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California or other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2004 - Mazda 6 | V | 2968 | 6 Cyl 3.0L | S | 181 |
- Performance Air Intake System
- Silver; Includes Air Filter/Water Repellent DryCharger Filter Wrap/Heat Shield/Polished Tubing; Estimated Horsepower Gain 6.19 HP At 5051 RPM;CARB E.O. D-269-37
- K/N s easy-to-install Typhoon cold-air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tubes come in a silver powder coat finish.
- Typhoon Cold Air Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 6.500 In. (165mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 6.19 Hp @ 5051 Rpm
- TUV Approved (Europe): No
- Intake Pipe Inlet Shape: Round
- Replacement Filter: Ru-4870
- Item Weight: 6.300 Lbs. (2.8 Kg)
- RPM: 5051
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Air Filter Outlet Length: 2.750 In. (70mm)
- System Type: Complete Cold Air
- Clamp Quantity: 5
- Air Filter Large End Diameter: 6.000 In. (152mm)
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Silver
- Clamp Color: Natural
- Clamp Material: Stainless Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: Aluminum
- Air Filter Outlet Width: 2.750 In. (70mm)
- Horse Power Increase: 6 Hp
- Intake Pipe Inlet Length: 10.250 In. (260mm)
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Paperboard
- Intake Pipe Inlet Width: 2.750 In. (70mm)
- Intake Pipe Outlet Length: 13.000 In. (330mm)
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: Yes
- Intake Pipe Outlet Width: 2.750 In. (70mm)
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Easy To Install Usually In 90 Minutes or Less
- Lasts Up To 100000 Miles Before Service Is Required
- Replaces Entire Factory Air Intake System
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
- The K&N 69-6025TS Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Mazda 6 models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in outside air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-6025TS cold-air intake consists of a black rubber topped K&N high-flow air filter that mounts near the driver side wheel well directing outside air through free-flowing aluminum tubing into a short ram induction tube that delivers high volumes of clean air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2004 - Mazda 6 | L | 2260 | 4 Cyl 2.3L | i | - |
Showing 1 - 3 of 3 products
Loading...